Whole-plant equipment
(Cutting connect with Chamfering)

Spindle Motor (kw(hp)) 5 HP(3.75kw) x 2 ps(Standard)
2 HP(1.5kw) ~ 5HP(3.75kw) (Optional)
Spindle Speed (rpm) 300 ~ 1500rpm (Standard)
800 ~ 2500rpm (Optional)
Frequency Converter (kw) 5HP~15HP (3.75kw~11kw)
Sever-Motor Feeding (kw(hp)) 1.5kw (Optional)
Air Pressure (mpa) 6~8 kg/cm², 120ml/min , 0.6~0.8mpa
Applicable Materals Various pipes including steel, iron, stainless steel, aluminum, bronze
Pipe and Bar
O.D. Outter I.D.
Inner Angle and End Face(mm)
A type workpiece Ø12~Ø60,
B type workpiece Ø50~Ø90,
C type workpiece Ø80~Ø120,
thickness T0.8~5mm
According to length of A、B or C type workpiece
Workpiece Length A type workpiece L25~300mm
B type workpiece L25~250mm
C type workpiece L25~200mm
According to outside of A、B or C type workpiece
Cutterhead (mm) O.D Ø130 Ø12~Ø52,(MAX Ø60) (Standard)
O.D Ø170 Ø50~Ø120, (Optional)
Machine Dimensions (LxWxH) (mm) 2330x1630x2130
Packing Dimensions (LxWxH) (mm) 2400x1700x2200
N.W. (kg) 2200 kg
G.W. (kg) 2500 kg
*This custom machine is designed according to assigned workpieces, specification and drawing. Please specify the OD, ID, end-face, chamfering angle and end knurling of the workpiece. According to customers special needs, we made custom machine.
Main Drive Motor 5HP 4 Pole A (std.)
5HP 2 Pole B (opt.)
Blade Speeds 
A: 4 sections
B: 2 sections
H 35RPM-120RPM
B:L 40RPM-140RPM
H 70RPM-240RPM
Frequency Inverter 5 kw / 7.5HP
Head Swivel 90°
Clamping Vise Single
Coolant Pump Motor 1/8HP or 1/4HP
Max. Clamping Capacity 150
Saw Blade Size Diameter (mm) HSS Ø250-Ø400(10"-16") StandardØ350
Bore (mm) Ø32
Pin Holes (mm) 2xØ11xPCD Ø63
Bar Feeding Length Single Stroke (mm) 0-700Servo motor complete cutting cycle
Double Stroke (mm)
Three Stroke (mm)
Length (mm) --
Servo Motor Feeding 1 Kw
Hydraulic Pump Motor 3HP (4P)
Operation Pressure 20-30 kg/cm²
Machine Dimensions (LxWxH) 2200x1400x2200
Packing Dimensions (LxWxH) (mm) 2280x1600x2200
Packing Dimensions (LxWxH) (inch) 90"x63"x87"
Net Weight 1450 kgs(3190 lbs)
Gross Weight 1650 kgs(3630 lbs)
*The manufacturer always performs product improvements to achieve the best possible performance. All dimensions and design characteristics shown in this catalogue are subject to change without notice. Products specifications are based on the actual machines. The manufacturer holds explanation rights.

Double End Chamfering  Conveying Multiple Tubule Clamping

Bar Cutting

Pipe Cutting

Pipe Chamfering

Double Headed Tuming

1.Standard cutterhead for left and right x 2 sets
2. Circular clamp two pieces in one set


2.Electrical control system
3.Complete cooling system
4.Pneumatic system or hydraulic system
5.Service tools


1.Custom cutterhead
2.Custom circular clamp
3.Vibration or ATF. Automatic carriage feeder
4.End Knurling Device
5.Mist cooling device


1.Saw blade
2.Movable safety guard
3.Cutting fluid.