Sawing Machine - THC-B90NC / THC-BNA102NC

Metal Cutting Machine

1.Fully Automatic Tungsten Carbide Sawing Machine THC-B90NC / BNA102NC
THC-B90NC
THC-BNA102NC
THC-B90NC
THC-B90NC
THC-BNA102NC
  • THC-B90NC
    1. Servo-motor drive+ball screw feed  transmission
    2. Sawhead driven by servo-motor+Ball screw transmission for cutting
    3. Feeding safety guard (optional)
    4. Fully feeding safety guard (optional)
       
    THC-BNA102NC
    1. Servo-motor drive+ball screw feed transmission
    2. Sawhead driven by servo-motor+ball screw transmission for cutting
    3. Feeding safety guard (optional)
    4. Fully feeding safety guard (optional)
     
    STANDARD ACCESSORIES
      THC-B90NC THC-BNA102NC
    Sawblade gap compensation device ν ν
    Tungsten pad for sawblade run-out ν ν
    Chip removing steel brush wheel ν --
    Screw type chip conveyor ν ν
    Mist cooling device ν ν
    Cutting fluid cooling device ν ν
    Angular steel slicing device ν ν
    Work light ν ν
     
    OPTIONAL ACCESSORIES
      THC-B90NC THC-BNA102NC
    TCT carbide sawblade ν --
    HSS sawblade ν --
    TIP aluminum carbide sawblade -- ν
    Aluminum dust collector -- ν
    Mist collecting devcie ν ν
    Cutting fluid ν ν
    Angular steel slicing device -- --
     
    CUTTING CAPACITY
     
    OPERATION DISPLAYS
     
     
  • MODEL   THC-B90NC THC-BNA102NC
    CUTTING CAPACITY   TCT Carbide sawblade / HSS Sawblade TIP Aluminum carbide sawblade
    Round solid bar mm ●15 ~ 90 ●20 ~ 101
    Square solid bar mm ■15 ~ 80 ■20 ~ 90
    Rectangle mm ▃▃15 ~ 80 ▃▃20 ~ 90
    Round pipe mm ○15 ~ 90 ○20 ~ 101
    Square pipe mm □15 ~ 80 □20 ~ 90
    Maximum length of head cut mm 10 ~ 60 10 ~ 60
    Waste material length at tail end mm 55~(55+π Cutting length) 55~(55+π Cutting length)
    Feeding length mm 5 ~ 600 cycle feeding 5 ~ 600 cycle feeding
    Manually stack line-up loader capacity kg 2500 2500
    Material length mm 2000 ~ 6000 2000 ~ 6000
    Material loading width mm 950 950

     

    MACHINE SPECIFICATIONS   THC-B90NC THC-BNA102NC
    TCT CARBIDE SAWBLADE mm Ø285 x 2.0 ~ Ø330 x 2.25 --
    Pin holes+Bore mm 4 x Ø11 x PCD63 x Ø32 --
    Tip aluminum carbide sawblade mm -- Ø330 x 1.7-3.0~355 x 2.2~3.0
    Ø355 x 3.0(std.)
    Pin holes+Bore mm -- 4 x Ø 11 x PCD63 x Ø 25.4
    ( Ø32 opt. )
    HSS sawblade mm Ø285 ~ Ø330/t2.0 ~2.5 --
    Spindle motor kw 7.5kw ~ 9kw (10HP-12HP) 11 kw (15HP)
    Spindle speeds rpm 50~180 2600 ~ 3500
    Frequency inverter kw 11kw (15HP) 11kw or 15kw (15HP or 20HP)
    Hydraulic pump motor kw 2.2kw (3HP x 4P) 2.2 kw (3 HP x 4P)
    Operation pressure mpa 7mpa 70kg/cm2 7mpa 70kg/cm2
    Oil tank capacity 約120 約120
    Air pressure mpa 0.4 ~ 0.6mpa 4 ~ 6kg/cm2 0.4 ~ 0.6mpa 4 ~ 6kg/cm2
    Feed drive   AC servo-motor (1.3kw or 1.5kw) and precision ball screw AC servo-motor (1.3kw or 1.5kw) and precision ball screw
    Sawhead drive   AC servo-motor (1.8kw or 2.0kw) and precision ball screw AC servo-motor (1.8kw or 2.0kw) and precision ball screw
    Feeding vise   Horizontal hydraulic type Horizontal hydraulic type
    Main vise   Horizontal and vertical hydraulic type, one set each Horizontal and vertical hydraulic type, one set each

     

    MACHINE DIMENSIONS AND WEIGHT   THC-B90NC THC-BNA102NC
    Machine size mm 6860 x 1889 x 1530 6860 x 1889 x 1530
    Weight (Machine+Feeder) Kg 2800 2800

    *The manufacturer always performs product improvements to achieve the best possible performance. All specifications, dimensions and design characteristics shown in this catalogue are subject to change without notice. Product specifications are based on the actual machines. The manufacturer holds explanation rights.
  • Subject
    Message
    Name
    Public Private
    Email
    Captcha
     
FONG HO MACHINERY INDUSTRY CO., LTD.
  • No.12, Lane 1191, Wen-Shin South Road, Tali Dist., Taichung City 41258, Taiwan