| FONG
HO MACHINERY INDUSTRIAL CO.,
LTD. |
|
 |
|
MODEL:THC-B130NC
- SERVO-MOTOR DRIVE + BALL SCREW FEED TRANSMISSION (STANDARD)
- SAWHEAD DRIVEN BY SERVO-MOTOR+ BALL SCREW TRANSMISSION FOR CUTTING (OPTIONAL)
- FULLY FEEDING SAFETY GUARD (OPTIONAL)
The THC-130NC High Speed Tungsten Carbide Sawing Machine is designed and engineered to create optimum cutting performance. It features high speed, high efficiency, smooth surface of cut and high accuracy. The THC-130NC is especially ideal for cutting solid bars and angular steel. Also suitable for cutting steel pipe by using a HSS sawblade. |
|
|
TCT EXTRA HARD TUNGSTEN
CARBIDE SAW BLADE |
HSS SAW BLADE |
CONTROL PANEL
The Human-Machine Interface computer controlled touch sensing screen assures maximum operational
convenience. All settings are centralized on the screen. |
|
|
|
|
| |
1.MENU DISPLAY |
2.AUTO RUN DISPLAY |
3.MACHINE MONITOR DISPLAY |
4.MANUAL OPERATION DISPLAY |
5.SETTING DISPLAY
|
|
|
THC-130NC |
Fully automatic extra hard tungsten carbide sawing machine |
+ |
Manual stack line up loader |
+ |
Automatic hydraulically operated material lifting |
+ |
Servo-motor drive+ ball screw feed transmission |
+ |
Hydraulically operated vise feed |
+ |
Main and top hydraulic vise |
+ |
A. Hydraulic driven sawhead feed for cutting motion (standard) |
+ |
B. Sawhead driven by servo-motor+ ball screw transmission for cutting (optional) |
+ |
Head and tail pieces separate automatically |
+ |
Automatic material outfeed |
| + |
| Continuous motion cycles |
| |
|
 |
 |
| MAGAZINE FEEDER |
MIST LUBRICATION DEVICE |
 |
 |
| HYDRAULICALLY OPERATED VISE FEED |
FEED SYSTEM IS DRIVEN BY
SERVO-MOTOR WITH BALL SCREW |
|
|
| CUTTING
CAPACITY |
TCT SAW BLADE |
HSS SAW BLADE |
| Round
solid bar |
mm |
●25 ~ 101 |
●15 ~ 110 |
| Square
solid bar |
mm |
■25 ~ 76 |
■15 ~ 100 |
| Round
pipe |
mm |
|
○10
~ 65 |
| Square
pipe |
mm |
|
□10
~ 60 |
| Maximum length of
head cut |
mm |
10
~ 50 |
| Waste material length
at tail end |
mm |
85~(85+π cutting length) |
| Feeding length |
mm |
5
~ 640 Continuous cycles |
| Manually stack line-up
loader capacity |
kg |
3200 |
| Material length |
mm |
3000
~ 6000 |
| Material loading width |
mm |
900 |
|
MACHINE SPECIFICATIONS |
| TCT saw blade |
mm |
Ø360 x t 2.6 |
| HSS saw blade |
mm |
Ø420 x t 2.5 ~ 3.5 |
| Spindle motor |
Kw |
11kw x 4P (15HP x 4P) |
| Spindle speeds |
rpm |
12 ~ 120 rpm. |
| Frequency converter |
|
15 kw (20HP x 4P) |
| Hydraulic pump motor |
Kw |
3.7 kw x 4p (5HP x 4P) |
| Operation pressure |
|
7 mpa 70 kg/cm2 |
| Oil tank capacity |
ℓ |
150 |
| Air pressure |
Mpa |
0.4 ~ 0.6 mpa 4 ~ 6 kg/cm2 |
| Feed drive |
|
AC
servomotor (1.8~2.0KW) and precision ball screw |
| Sawhead drive |
|
A. Material feeding and cutting is driven by hydarulic system.
B. AC servo-motor(2.9Kw or 3.5Kw) +ball screw transmission for cutting (optional) |
| Feeding vise |
|
Parellel hydraulic type |
| Main vise |
|
Parallel and hold down hydraulic type, one set each |
| MACHINE
DIMENSIONS AND WEIGHT |
|
|
| Machine size |
mm |
6700 x 2200 x 1900 |
| Weight (Machine + Feeder) |
kg |
3500+1500 |
| * The
manufacturer always performs product improvements to
achieve the best possible. All specifications,
dimensions and design characteristics shown in this
catalogue are subject to change without notice. (
Products specifications are based on the actual
machines. ) |
| STANDARD ACCESSORIES |
- Sawblade gap compensation device
- Tungsten pad for sawblade run-out
- Chip removing steel brush wheel
- Screw type chip conveyor
- Mist cooling device
- Cutting fluid cooling device
- Work light
|
| OPTIONAL ACCESSORIES |
- TCT sawblade
- HSS sawblade
- Cutting fluid
|
|
|
|
 |
Copyright © FONG HO MACHINERY INDUSTRY CO., LTD.
Hosted by Machinetools Directory , Plastic and Rubber Machine Directory. |
