| MODEL |
|
FHC-355SA |
| Main Drive Motor |
|
5 HP (4 Pole) 50/60 HZ |
| Blade Speeds |
|
50HZ 3200 RPM
60HZ 3200 RPM |
| Head Swivel |
|
90º / 45º |
| Clamping Vise |
|
Double |
| Coolant Pump
Motor |
|
40W |
| Max. Clamping
Capacity |
|
150 |
| Saw Blade Size |
Diameter |
mm |
TIP Ø305-Ø355
(12"-14") Standard Ø355 |
| Bore |
mm |
Ø25.4 |
| Pin Holes |
mm |
-- |
| Bar Feeding Length |
Single Stroke |
mm |
-- |
| Double Stroke |
mm |
-- |
| Three Stroke |
mm |
-- |
| Bar Feeding Servo Motor |
|
-- |
| Hydraulic Pump Motor |
|
-- |
| Operation Pressure |
|
6 kg/cm2 (120 ℓ/min) |
| Machine DImensions (LxWxH) |
mm |
1400x1050x1800 |
| Packing DImensions (LxWxH) |
mm |
750x1050x1800 |
| inch |
30"x42"x60" |
| Net Weight |
|
340 kgw (748 lbs) |
| Gross Weight |
|
400 kgw (880 lbs) |
| MODEL |
BL-18 |
DB-350 |
| Cutting Angle |
90º & 45º |
45º (fixed) |
| Maximum Width of Cut |
300 mm |
100 mm |
| Maximum Thicknewss of Cut |
125 mm |
100 mm |
| Saw Arbor Speed |
3500 RPM |
3440 RPM |
| Sawblade Size |
Ø355-Ø455xØ25.4
Hole x 80z or 100z or 120z |
Ø355xØ25.4
Hole x 80z or 100z or 120z |
| Cycle Speed |
10-15 cycle/min. |
10-15 cycle/min. |
| Table Area |
645x668 mm |
812x305 mm |
| Table Height from Floor |
850 mm |
820 mm |
| Motor |
5 HP |
1 HPx2 |
| Air Pressure |
5-6 kg/cm2 (120 ℓ/min) |
5 kg/cm2 (120 ℓ/min) |
| Length of Roller |
made of meet the required length |
| Machine Dimension |
840x660x1150 mm |
570x840x1300 mm |
| Packing Dimension |
890x740x1350 mm |
1300x890x1500 mm |
*The manufacturer always performs product improvements to achieve the best possible performance.
All specifications, dimensions and design characteristics shown in this catalogue are subject to change
without notice. Product specifications are based on the actual machines.
The manufacturer holds
explanation rights. |
