‧Machine designed to be flexible, prompt action, accurate for large-diameter outside diameter, inside diameter and flat double-ended chamfering.
‧Designed and engineered for chamfering and trimming inner and outer end angles on circular pipe or bar stock at one time, providing efficient and precise performance.
‧Delicate clamping vise and cutter head ensure high concentricity of results.
‧Specially designed cutter head and standardized cutter make cutter adjustment easy.
‧Simple structure made possible by shaft server motor drive and cam-feeding with the same motion and shorten cycle time. Easy setting and fast adjustment by touch sensing screen.
‧Easy operation allows one person to control multiple machines.
‧Motion cycle includes automatic material in feed through a channel (automatic feeder is optional). Automatic cutting feeding retracting and automatic workpiece out feed. Continuous motion cycles provide high machining speed , high accuracy, reduced labor requirement and easy operation while greatly upgrading productivity.
‧ Φ16 ~Φ10 Chamfering inner and outter angles
‧ Φ10~Φ3.2
Chamfering inner and outter angles
‧Optional
cutter head
Ø5~Ø12
‧Standard cutter head Φ12~Φ52 （MAXΦ60）
‧Standard cutter head
Φ25~Φ 80
Φ25~Φ150
‧FHC- 75EA Clamping mold
‧FHC-120EA Clamping mold
‧Chamfering samples
‧50SA Standard clamp Φ3.2 ~Φ55
‧ Φ12 ~Φ52 Twin head chamfering clamp
‧82SA Standard clamp Φ10 ~Φ 80
‧110SA Standard clamp Φ25 ~Φ110
‧150SA Standard clamp Φ25 ~Φ150
‧150SA Optional clamp Φ50 ~Φ170
SPECIFICATIONS
UNIT
FHC-120EA
Spindle Motor
kw(hp)
3 HP(2.2kw) x 2 ps(Standard)
2 HP(1.5kw) ~ 5HP(3.75kw) (Optional)
Spindle Speed
rpm
300 ~1500rpm (Standard)
800~2500rpm (Optional
Frequency Converter
5HP~15HP (3.75kw~11kw)
Sever-Motor
Feeding
kw(hp)
1.5kw (Optional)
Air Pressure
kw
6~8 kg/cm2, 120ml/min , 0.6~0.8mpa
Applicable
Materals
mpa
Various pipes including steel, iron, stainless steel, aluminum, bronze
Pipe and Bar
O.D. Outter I.D.
Inner Angle and End Face
A type workpiece Ø12~Ø60,
B type workpiece Ø50~Ø90,
C type workpiece Ø80~Ø120,
thickness T0.8~5mm
According to length of A、B or C type workpiece
Workpiece Length
mm
A type workpiece L25~300mm
B type workpiece L25~250mm
C type workpiece L25~200mm
According to outside of A、B or C type workpiece
Cutterhead
mm
O.D Ø130 Ø20~Ø52,(MAX Ø60) (Standard)
O.D Ø170 Ø50~Ø120, (Optional)
Machine Dimensions (LxWxH)
mm
2330x1630x2130
Packing Dimensions (LxWxH)
mm
2400x1700x2200
N.W.
kg
2200
kg
G.W.
kg
2500 kg
* This custom machine is designed according to assigned workpieces, specification and drawing. Please specify the OD, ID, end-face, chamfering angle and end knurling of the workpiece. According to customers special
needs, we made custom machine.
* The manufacturer always performs product improvements to achieve the best possible performance.
All dimensions and design characteristics shown in this catalogue are subject to change
without notice.
Products specifications are based on the actual machines. The manufacturer holds
explanation rights.
1.Standard cutterhead for left and right x 2 sets (To be made according to different angle of outside dia. and inside dia.)
2.Circular clamp two pieces in one set (To be made according to different dimension of outside dia.)
V clamp Ø20~Ø60 (Optional)
