Product

THC-B90NC

Fully Auto Tungsten Carbide Sawing Machine
(Bar/Tube)

THC-B90NC
 
Model THC-B90NC
Cutting Capacity TCT carbide sawblade
HSS sawblade
Round Solid Bar (mm) 15 ~ 90
Square Solid Bar (mm) 15 ~ 80
Rectangle (mm) 15 ~ 80
Round Pipe (mm) 15 ~ 90
Square Pipe (mm) 15 ~ 80
Maximum Length of Head Cut (mm) 10 ~ 60
Waste Material Length at Tail End (mm) 55 ~ (55+π Cutting length)
Feeding Length (mm) 5 ~ 600 Continuous cycles
Manually Stack Line-up Loader Capacity (kg) 3000
Material Length (mm) 2000 ~ 6000
Material Loading Width (mm) 950
 
Machine Specifications THC-B90NC
TCT Carbide Sawblade Ø285 x 2.0 ~ Ø330 x 2.25
Pin Holes + Bore (mm) 4 x Ø11 x PCD63 x Ø32
TIP Aluminum Carbide Sawblade (mm) --
Pin Holes + Bore (mm) --
HSS Sawblade (mm) Ø285 ~ Ø330/t2.0 ~2.5
Spindle Motor (kw) 7.5kw ~ 9kw (10HP-12HP)
Spindle Speeds (rpm) 50~180
Frequency Inverter (kw) 11kw (15HP)
Hydraulic Pump Motor (kw) 2.2kw (3HP x 4P)
Operation Pressure (mpa) 7mpa 70kg/cm2
Oil Tank Capacity (ℓ) About 120
Air Pressure (mpa) 0.4 ~ 0.6mpa 4 ~ 6kg/cm2
Feed Drive AC servo-motor(1.3kw or 1.5kw) and precision ball screw
Sawhead Drive AC servo-motor(1.8kw or 2.0kw) +
Precision ball screw transmission for cutting (Opt.)
Feeding Vise Horizontal hydraulic type
Main Vise Horizontal and vertical hydraulic type , one set each
 
Machine Dimensions and Weight THC-B90NC
Machine Size (mm) 6860 x 1889 x 1530
Weight (Machine + Feeder) (kg) 2800
*The manufacturer always performs product improvements to achieve the best possible performance. All models specifications, dimensions and design characteristics shown in this catalogue are subject to change without notice. Product specifications are based on the actual machines. The manufacturer holds explanation rights.
Cutting Capacity
Cutting Capacity for Various Workpiece Shape
THC-B90NC

Material: Steel Pipe Thickness: ≤2.5 ~ 4.5mm

Sawblade Dia.
Ø285 Ø70 60 x 60 55 x 60
※ Ø315 Ø85 80 x 80 75 x 80
Ø330 Ø90 85 x 85 80 x 85
 
Model Servo-motor Drive Ball Screw Feed Hydraulic Driven Sawhead Feed for Cutting Motion Sawhead Driven by Servo-motor Ball Screw Transmission for Cutting
THC-A70NC  
THC-B70NC  
THC-B76NC  
THC-B90NC  
THC-BNA102NC  
THC-A101NC  
THC-B101NC  
THC-A130NC  
THC-B130NC  
THC-A150NC  
THC-B150NC  
THC-A165NC  
THC-B165NC  
THC-NA168NC  
THC-BNA168NC  

A. Manual Stack Line Up Loader (THC-130NC)

B. Touch Sensing Screen

C. Linear Slides & Ball screw (THC-B90NC)

D. Feed System is Driven by Servo-motor With Ball (THC-B130NC)

E. Mist Lubrication Device

F. Head and Tail Pcs are Separated with Workpieces Automatically

 

G. Chain Type Chip Conveyor

 
Model Sawblade Gap Compensation Device Tungsteen Pad for Sawblade Run-out Chip Removing Steel Brush Wheel Scraper Type Chip Conveyor Mist Cooling Device Cutting Fluid Cooling Device Angular Steel Slicing Device Work Light
THC-A70NC
THC-B70NC
THC-B76NC
THC-B90NC
THC-BNA102NC -- --
THC-A101NC --
THC-B101NC --
THC-A130NC --
THC-B130NC --
THC-A150NC --
THC-B150NC --
THC-A165NC --
THC-B165NC --
THC-BA168NC -- --
THC-BNA168NC -- -- --

01. Automatic Locating Equipment

02. Automatic Magazine Loader

03. Manual Storage Loader

04. Automatic Lifting Equipment

A. Feeding Safety Guard

B1. HSS - Circular Saw Blade

B2. TCT - Extra Hard Tungsten Carbide Circular Saw Blade

C. Automatic Roller Out Feeding Device(150~350mm)

D. Oil Mist Collector

E. Angular Steel Slide Assistance Device

 
Model TCT Carbide Sawblade HSS Sawblade TIP Aluminum Carbide Sawblade Aluminum Dust Collector Oil Mist Collector Cutting Fluid Angular Steel Slicing Device Automatic Roller Out Feeding Device Manual Storage Loader Automatic Feeding Equipment Automatic Magazine Loader Automatic Locating Equipment
THC-A70NC -- -- --
THC-B70NC -- -- --
THC-B76NC -- -- --
THC-B90NC -- -- --
THC-BNA102NC -- --
THC-A101NC -- --
THC-B101NC -- --
THC-A130NC -- --
THC-B130NC -- --
THC-A150NC -- -- --
THC-A150NC -- -- --
THC-A150NC -- -- --
THC-A165NC -- -- --
THC-BA168NC -- --
THC-BNA168NC -- --